How to Use Liqui Moly Hydraulic Lifter Additive? Expert Guide -

How to use liqui moly Hydraulic lifter additive? To use Liqui Moly Hydraulic Lifter Additive, warm up the engine, then add the entire can directly into the engine oil through the oil filler cap. It mixes with the motor oil and works while driving. Suitable for both gasoline and diesel engines. Use during oil change or anytime.

Using Liqui Moly Hydraulic Lifter Additive could be the simple fix you need to keep your engine running smoothly. You’ll learn exactly how to use this powerful product to reduce noise, improve performance, and protect your engine. Keep reading—you’re just a few steps away from a quieter, healthier engine.

How to Use Liqui Moly Hydraulic Lifter Additive?

Credit: www.amazon.ca

Liqui Moly Hydraulic Lifter Additive Benefits

Liqui Moly Hydraulic Lifter Additive offers many benefits for your car’s engine. It helps keep the hydraulic lifters clean and working well. This improves engine performance and reduces noise. Using this additive can extend the life of your engine parts.

The additive is easy to use and fits into regular maintenance. It supports smooth operation and prevents wear. Many drivers notice better engine sounds and smoother driving after using it. The product also helps reduce oil consumption and keeps the oil cleaner.

Improves Engine Noise

Hydraulic lifters can cause ticking or tapping sounds. The additive cleans the lifters and stops this noise. A quieter engine means less stress while driving.

Protects Against Wear

The additive forms a protective layer on lifters. This layer reduces friction and wear. It helps parts last longer and prevents costly repairs.

Keeps Oil Clean

Contaminants can clog hydraulic lifters. The additive helps break down sludge and dirt. Cleaner oil means better engine health and smoother lifter function.

Easy To Use

Simply add the recommended amount to the engine oil. No special tools or skills are needed. Regular use helps maintain lifter performance over time.

Credit: www.liqui-moly.com

When To Use The Additive

Knowing the right time to use Liqui Moly Hydraulic Lifter Additive improves engine performance. This additive helps reduce noise and wear in the hydraulic lifters. Choosing the proper moment to apply it ensures the best results for your engine’s health.

Before Engine Noise Starts

Apply the additive at the first sign of lifter noise. Early use can stop the noise from getting worse. It protects the lifters and keeps the engine running smoothly.

During Regular Oil Changes

Add the product with fresh engine oil. This method keeps the hydraulic lifters clean. It also helps maintain proper oil flow and pressure to the lifters.

After Engine Repairs

Use the additive after fixing lifter problems. It helps the new parts work better together. This can prevent future lifter noise and wear.

In High Mileage Engines

Older engines benefit from the additive. It helps reduce lifter wear in high mileage cars. This prolongs engine life and improves performance.

Preparation Before Application

Ensure the engine is cool before adding the Liqui Moly Hydraulic Lifter Additive. Shake the bottle well to mix the contents evenly. Check the oil level and add the additive directly into the engine oil.

Gather Necessary Tools And Materials

Start by collecting everything needed for the job. This includes the Liqui Moly Hydraulic Lifter Additive, a clean funnel, gloves, and a clean rag. Having these ready saves time and avoids mistakes.

Check Engine Temperature

Make sure the engine is cool before applying the additive. A cold engine prevents burns and ensures the additive mixes well with the oil. Wait at least 30 minutes after turning off the engine.

Read The Vehicle Manual

Consult the car manual to find the correct oil type and amount. It also helps to check if the additive suits your engine model. Follow all manufacturer guidelines carefully.

Locate The Oil Filler Cap

Identify the oil filler cap on the engine. Clean the area around the cap to avoid dirt entering the engine. Use a rag to wipe away dust and grime before opening.

Credit: www.youtube.com

Step-by-step Application Process

The Step-by-Step Application Process of Liqui Moly Hydraulic Lifter Additive is simple and clear. Follow each step carefully for the best results. This guide helps you use the product correctly and safely. It improves your engine’s performance and reduces noise from lifters.

Using the additive does not require special tools or skills. Just prepare your vehicle and product. Then follow the instructions below to add the hydraulic lifter additive effectively.

Park your car on a flat surface. Turn off the engine and let it cool down. Open the hood and locate the oil filler cap. Make sure the engine oil is at the right level. Read the product label for the recommended dosage. Have a clean cloth ready for any spills.

Adding The Hydraulic Lifter Additive

Remove the oil filler cap carefully. Pour the correct amount of Liqui Moly Hydraulic Lifter Additive into the oil filler opening. Use the measuring cup or bottle markings for accuracy. Avoid spilling the additive on engine parts. Replace the oil filler cap tightly after pouring the additive.

Running The Engine

Start the engine and let it run at idle for about 10 minutes. This allows the additive to mix with the engine oil. Listen for any reduction in lifter noise during this time. Turn off the engine and check for leaks. Wipe off any spilled additive from the engine surface.

After Application Tips

Drive your car normally to let the additive work fully. Use the additive every oil change or as recommended on the product label. Monitor your engine’s sound and performance regularly. Store the additive in a cool, dry place for future use.

Tips For Best Results And Maintenance

Using Liqui Moly Hydraulic Lifter Additive correctly ensures smooth engine performance. Following simple tips helps get the best results and keeps the lifters in good shape. Proper maintenance extends the life of your engine parts and avoids common issues.

Apply the additive carefully and regularly. Check the engine oil level and condition often. Clean oil helps the additive work better. Use the right amount each time. Overuse can cause problems instead of fixing them.

Use The Correct Engine Oil

Choose the engine oil recommended for your vehicle. The additive works best with clean, quality oil. Changing oil at regular intervals keeps the lifters in top condition. Avoid mixing different oil brands or types.

Apply Additive At Engine Warm-up

Add the product when the engine is warm but not hot. Warm oil spreads the additive evenly. Running the engine for a few minutes before adding helps the lifters absorb it. This step improves the additive’s effect.

Follow The Recommended Dosage

Read the product label carefully to use the right amount. Using too much additive can cause damage. Small doses regularly work better than large amounts at once. Stick to the manufacturer’s instructions.

Monitor Engine Noise And Performance

Listen for changes in engine noise after applying the additive. Reduced lifter noise means the product works well. If noise continues, check for other engine issues. Keep a maintenance log to track results.

Regular Oil Changes Are Essential

Do not skip oil changes after adding the lifter additive. Old oil reduces additive efficiency. Fresh oil helps remove dirt and deposits. Clean oil supports the additive’s function and protects engine parts.

Frequently Asked Questions

What Is Liqui Moly Hydraulic Lifter Additive Used For?

It helps reduce noise and wear in engine hydraulic lifters for smoother performance.

How Do I Add Liqui Moly Hydraulic Lifter Additive?

Pour it into the engine oil filler before or during an oil change.

How Often Should I Use This Hydraulic Lifter Additive?

Use it every oil change or when you hear lifter noise in your engine.

Conclusion

Using Liqui Moly Hydraulic Lifter Additive helps keep your engine quiet. It cleans and protects lifters from wear and tear. Simply add it to your engine oil as directed. This keeps your hydraulic lifters working smoothly. Regular use can reduce noise and improve engine life.

Always follow the product instructions carefully. Taking these steps protects your engine and saves money. A quiet, well-running engine feels better to drive. Try this additive to maintain engine health easily. Simple, effective care makes a big difference.

Read More

Max Langon

My name is Max langon and I am the founder of automothrone.com website. From this website, you will get automotive related information